Page 2
SKU 41983
for technical questions, please call 1-800-444-3353.
SpEcificATiOnS
Motor
110 V~, 60 Hz, 620 W, n
0
750/min
Capacity
1”
Chuck Type
SDS
Rotation
Reversible
Cord
UL Listed with 2-Pole Polarized Plug
BPM
2920
Weight
10.5 lb.
Also Includes
Spanner, (4) SDS Drill Bits (10,12,14 and 22 mm), 4 Point
Chisel, Depth Gauge Rod, Grease, and Carbon Brush Set
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your
invoice with this manual. Write the invoice number on the inside of the front cover. Write the
product’s serial number in the back of the manual near the assembly diagram, or write month and
year of purchase if product has no number. Keep this manual and invoice in a safe and dry place
for future reference.
gEnERAl SAfETY RulES
wARning!
READ AnD unDERSTAnD All inSTRucTiOnS
failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE inSTRucTiOnS
wORk AREA
keep your work area clean and well lit.
1.
Cluttered benches and dark areas invite
accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of
2.
flammable liquids, gases, or dust.
Power tools create sparks which may ignite the dust
or fumes.
keep bystanders, children, and visitors away while operating a power tool.
3.
Distractions
can cause you to lose control. Protect others in the work area from debris such as chips
and sparks. Provide barriers or shields as needed.
ElEcTRicAl SAfETY
grounded tools must be plugged into an outlet properly installed and grounded in
1.
accordance with all codes and ordinances. never remove the grounding prong or
E194601
REV 08e
