background image

SKU 45005 

For technical questions, please call 1-800-444-3353. 

Page 2

REV 05l

You will need the manual for the 

safety warnings and precautions, assem-

bly instructions, operating and mainte-

nance procedures, parts list and diagram.  

Keep your invoice with this manual.  Write 

the invoice number on the inside of the 

front cover.  Keep the manual and invoice 

in a safe and dry place for future refer-

ence.

SAVE THESE WARninGS

WARninG!

READ AnD UnDERSTAnD 

ALL inSTRUCTiOnS

Failure to follow all instruc-

tions listed below may result 

in electric shock, fire, and/or 

serious injury. 

WORK AREA

Keep your work area clean and well 

1. 

lit.

  Cluttered benches and dark areas 

invite accidents.

Do not operate equipment in ex-

2. 

plosive atmospheres, such as in 

the presence of flammable liquids, 

gases, or dust.  

Equipment creates 

sparks which may ignite the dust or 

fumes.

Keep bystanders, children, and 

3. 

visitors away while operating 

equipment. 

Distractions can cause 

you to lose control.

ELECTRiCAL SAFETY

Grounded equipment must be 

1. 

plugged into an outlet properly 

installed and grounded in accor-

dance with all codes and ordinanc-

es.  never remove the grounding 

prong or modify the plug in any 

way.  Do not use any adapter plugs.  

Check with a qualified electrician 

if you are in doubt as to whether 

the outlet is properly grounded.

  

If the equipment should electrically 

malfunction or break down, ground-

ing provides a low resistance path to 

carry electricity away from the user.

Double insulated equipment is 

2. 

equipped with a polarized plug 

(one blade is wider than the other).  

This plug will fit in a polarized out

-

let only one way.  if the plug does 

not fit fully in the outlet, reverse the 

plug.  If it still does not fit, contact 

a qualified electrician to install a 

polarized outlet.  Do not change 

the plug in any way.

  Double insula-

tion   eliminates the need for the 

three wire grounded power cord and 

grounded power supply system.

SPECiFiCATiOnS

Input

120 V~, 60 Hz, 1.3 A

Output Power

6* & 2* A at 12 VDC; 6* A at 6 VDC

Battery Cables 6’ 7”; 18 AWG
Line Cord

6’ 6” long; 3-prong plug

Features

Ammeter

Self-resetting circuit breaker

*Amperage is only present while connected to a battery.

E224783

Summary of Contents for 45005











Reviews: