SKU 65519
For technical questions, please call 1-800-444-3353.
Page 11
SpeciFicAtiOnS
Electrical Requirements
120 V~ / 60 Hz / 6 A
Motor No Load Speed
10,000 RPM
Wheel Size
4-1/2” Diameter x 1/4”
Thick
Spindle Arbor Diameter
5/8”
Spindle Thread
11 TPI
224184
unpAcKing
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
inStructiOnS FOr
putting intO uSe
read the entire iMpOrtAnt
SAFetY inFOrMAtiOn
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
tO preVent
SeriOuS injurY
FrOM AccidentAl
OperAtiOn:
turn the power Switch of the
tool to its “OFF” position and
unplug the tool from its
electrical outlet before
assembling or making any
adjustments to the tool.
note:
For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
Assembly
installing the Auxiliary handle
handle (51)
attachment points
Spindle lock (1)
1.
The Handle (51) can be installed in
three different positions; on top, or on
either side of the Gear Box (3).
Screw the threaded end of the Han-
2.
dle into the selected position. Tighten
securely before beginning work.
guard adjustment
Depending on where the Handle is
3.
mounted, the Guard may have to
be moved. Adjust the Guard (15) to
the proper position for the intended
operation before installing a grinding
wheel or other disc.
Loosen the screws in the collar of
4.
the Guard and rotate to the position
desired, see next picture.