SKU 65519
For technical questions, please call 1-800-444-3353.
Page 4
power tool use and care
4.
do not force the power tool. use
a.
the correct power tool for your ap-
plication.
The correct power tool will
do the job better and safer at the rate
for which it was designed.
do not use the power tool if the
b.
switch does not turn it on and off.
Any power tool that cannot be con
-
trolled with the switch is dangerous
and must be repaired.
disconnect the plug from the
c.
power source before making any
adjustments, changing accesso-
ries, or storing power tools. Such
preventive safety measures reduce
the risk of starting the power tool ac
-
cidentally.
Store idle power tools out of the
d.
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to oper-
ate the power tool. Power tools are
dangerous in the hands of untrained
users.
Maintain power tools. check for
e.
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool’s operation. if dam-
aged, have the power tool repaired
before use. Many accidents are
caused by poorly maintained power
tools.
use the power tool and acces-
f.
sories in accordance with these
instructions, taking into account
the working conditions and the
work to be performed. Use of the
power tool for operations different
from those intended could result in a
hazardous situation.
Service
5.
have your power tool serviced by
a.
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
grinding, Sanding or Wire
Brushing Operation Safety
Warnings
this power tool is intended to
1.
function as a grinder, sander or
wire brushing tool. read all safety
warnings, instructions, illustra-
tions and specifications provided
with this power tool.
Failure to fol-
low all instructions listed below may
result in electric shock, fire and/or
serious injury.
Operations such as polishing or
2.
cutting-off are not recommended
to be performed with this power
tool.
Operations for which the power
tool was not designed may create a
hazard and cause personal injury.
do not use accessories which
3.
are not specifically designed and
recommended by the tool manu-
facturer.
Just because the accessory
can be attached to your power tool, it
does not assure safe operation.
the rated speed of the accessory
4.
must be at least equal to the maxi-
mum speed marked on the power
tool.
Accessories running faster than
their RATED SPEED can break and
fly apart.
the outside diameter and the
5.
thickness of your accessory must
be within the capacity rating of
your power tool.
Incorrectly sized
