SKU 66753
for technical questions, please call 1-800-444-3353.
Page 10
set up instruCtiOns
read the entire iMpOrtant
safetY infOrMatiOn
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
tO prevent
seriOus injurY
frOM aCCidental
startinG:
turn the power switch of the
equipment to its “Off”
position, wait for the engine to
cool, and disconnect the
spark plug wire(s) before
assembling or making any
adjustments to the equipment.
tO prevent
seriOus injurY:
Operate only with proper
spark arrestor installed.
Operation of this equipment
may create sparks that
can start fires around dry
vegetation.
a spark arrestor may be
required.
the operator should contact
local fire agencies for laws
or regulations relating to fire
prevention requirements.
note:
For additional information regarding
the parts listed in the following pages,
refer to the Parts Lists and Assembly
Diagrams near the end of this
manual.
assembly
Abrasive
Blade
Diamond
Blade
figure 2
Cutting blades are available in two
standard designs: abrasive blades
and diamond blades. Before using
any blade, check it for damage. Use
the ring-test, described in next sec-
tion, for abrasive blades and check
diamond blades for bent or damaged
flanges or accumulated dirt.
