SKU 66753
for technical questions, please call 1-800-444-3353.
Page 5
Do not cover the engine or equipment
13.
during operation.
Keep the equipment, engine, and sur-
14.
rounding area clean at all times.
Use the equipment, accessories, etc.,
15.
in accordance with these instructions
and in the manner intended for the
particular type of equipment, taking
into account the working conditions
and the work to be performed. Use
of the equipment for operations differ-
ent from those intended could result
in a hazardous situation.
Do not operate the equipment with
16.
known leaks in the engine’s fuel sys-
tem.
This product contains or, when used,
17.
produces a chemical known to the
State of California to cause cancer
and birth defects or other reproduc-
tive harm. (California Health & Safety
Code § 25249.5,
et seq.
)
When spills of fuel or oil occur, they
18.
must be cleaned up immediately.
Dispose of fluids and cleaning materi
-
als as per any local, state, or federal
codes and regulations. Store oil rags
in a bottom-ventilated, covered, metal
container.
Keep hands and feet away from
19.
moving parts. Do not reach over or
across equipment while operating.
Before use, check for misalignment
20.
or binding of moving parts, breakage
of parts, and any other condition that
may affect the equipment’s operation.
if damaged, have the equipment
serviced before using.
Many ac-
cidents are caused by poorly main-
tained equipment.
Use the correct equipment for the
21.
application. Do not modify the equip-
ment and do not use the equipment
for a purpose for which it is not in-
tended.
Cut-Off saw safetY
preCautiOns
Never use carbide-tipped, woodcut-
1.
ting, or circular machine Saw Blades.
They can cause severe personal
injury from reactive forces, blade con-
tact, or thrown objects.
Only cut asphalt, concrete, stone,
2.
brick, and plastics with this Cut Off
Saw.
Inspect the Saw Blade frequently,
3.
and replace immediately if the Blade
is cracked, or warped. Cracked or
warped Saw Blades may shatter or
break and cause serious personal
injury.
always install the saw blade so
4.
that the arrow on the blade points
in the direction of the rotation of
the spindle.
Keep hands and fingers away from
5.
the cutting area and saw blade.
never attempt to cut more than
6.
one workpiece at a time.
when cutting a large workpiece,
7.
make sure its entire length is prop-
erly supported.
If necessary, use a
roller stand (not included).
allow the saw blade to spin up to
8.
full speed before feeding it into a
workpiece.
When turning off the Cut
Off Saw, allow the Saw Blade to spin
down and stop on its own. Do not
