Page 4
For technical questions, please call 1-800-444-3353.
SKU 67429
Power tool use and care
4.
do not force the power tool. use
a.
the correct power tool for your
application.
The correct power tool
will do the job better and safer at the
rate for which it was designed.
do not use the power tool if the
b.
switch does not turn it on and
off.
Any power tool that cannot
be controlled with the switch is
dangerous and must be repaired.
store idle power tools out of
c.
the reach of children and do not
allow persons unfamiliar with the
power tool or these instructions
to operate the power tool.
Power
tools are dangerous in the hands of
untrained users.
maintain power tools. Check
d.
for misalignment or binding of
moving parts, breakage of parts
and any other condition that may
affect the power tool’s operation.
if damaged, have the power
tool repaired before use.
Many
accidents are caused by poorly
maintained power tools.
Keep cutting tools sharp and
e.
clean.
Properly maintained cutting
tools with sharp cutting edges are
less likely to bind and are easier to
control.
use the power tool, accessories
f.
and tool bits etc. in accordance
with these instructions, taking
into account the working
conditions and the work to be
performed.
Use of the power tool
for operations different from those
intended could result in a hazardous
situation.
service
5.
have your power tool serviced by
a.
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
Specific Safety Warnings
Maintain labels and nameplates on
1.
the tool. These carry important safety
information. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
Avoid unintentional starting. Prepare
2.
to begin work before turning on the
tool.
Do not lay the tool down until it has
3.
come to a complete stop. Moving
parts can grab the surface and pull
the tool out of your control.
Do not leave the tool unattended
4.
when the Battery Pack (sold
separately) is attached. Turn off the
tool, and remove the Battery Pack
before leaving.
Read and adhere to the instruction
5.
manual of the Battery Charger
(67104) (sold separately) for
important safety warnings and
instructions on how to properly
operate the Lithium Battery Charger.
Do not use this Rotary tool with any
6.
other Battery or Charger.
CAUTION: Avoid accidental injury.
7.
Keep hands and fingers safely away
from the bits (sold separately).
This product is not a toy. Keep it out
8.
of reach of children.
