Page 8
For technical questions, please call 1-800-444-3353.
SKU 67429
Remove the Battery Pack, allow time
9.
for it to cool, and then place in the
Charger, making sure the Charger
is out of reach of children. Remove
the Bit, then store the tool and
accessories indoors out of children’s
reach.
maintenanCe and
serViCing
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
to PreVent
serious injury
From aCCidentaL
oPeration:
turn the Power dial of the tool
off and remove the Battery
Pack before performing any
inspection, maintenance, or
cleaning procedures.
to PreVent serious
injury From tooL
FaiLure:
do not use damaged
equipment. if abnormal noise
or vibration occurs, have the
problem corrected before
further use.
Cleaning, maintenance, and
Lubrication
BeFore eaCh use,
1.
inspect the
general condition of the tool. Check
for loose hardware, misalignment or
binding of moving parts, cracked or
broken parts, and any other condition
that may affect its safe operation.
aFter use,
2.
wipe external surfaces
of the tool with a clean cloth.
note:
Keep Collar (3) securely in place
at all times. There are no lubricating
point inside the Collar.
warning!
Do not use if either
the Battery Pack or Charger are
damaged in any way.
BATTERY MUST BE RECYCLED OR
DISPOSED OF PROPERLY. Do not
short, incinerate or open battery.
