Page 4
For technical questions, please call 1-800-444-3353.
SKU 68364
Auto Hammer Safety Warnings
1.
Wear hearing protection during use;
Auto Hammer is loud during operation.
2.
Do not use Auto Hammer with
nails longer than 2-1/2”.
3.
Do not leave Auto Hammer
unattended during charging.
4.
Use as intended only. Use to hammer nails
into the following materials only: wood,
wood-like materials and plaster board.
5.
Hold power tools by insulated gripping
surfaces when performing an operation where
the cutting tool may contact hidden wiring.
Contact with a ″live″ wire will make exposed metal
parts of the tool ″live″ and shock the operator.
6. Maintain labels and nameplates on the tool.
These carry important safety information. If
unreadable or missing, contact Harbor
Freight Tools for a replacement.
7. Avoid unintentional starting. Prepare to
begin work before turning on the tool.
8. Do not lay the tool down until it has come to
a complete stop. Moving parts can grab the
surface and pull the tool out of your control.
9. When using a handheld power tool, maintain a firm grip
on the tool with both hands to resist starting torque.
10. Do not leave the tool unattended when it is plugged
into an electrical outlet. Turn off the tool, and
unplug it from its electrical outlet before leaving.
11.
The battery charger gets hot during use.
The charger’s heat can build up to unsafe
levels and create a fire hazard if it does not
receive adequate ventilation, due to an
electrical fault, or if it is used in a hot environment.
Do not place the charger on a flammable surface. Do
not obstruct any vents on the charger.
Especially
avoid placing the charger on carpets and rugs; they
are not only flammable, but they also obstruct
vents under the charger.
Place the charger on a stable, solid, nonflammable
surface (such as a stable metal workbench or concrete
floor) at least 1 foot away from all flammable objects,
such as drapes or walls. Keep a fire extinguisher and a
smoke detector in the area. Frequently monitor the
charger and battery while charging.
12. This product is not a toy. Keep it
out of reach of children.
13. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in close
proximity to heart pacemaker could cause pacemaker
interference or pacemaker failure. In addition, people
with pacemakers should:
• Avoid operating alone.
• Do not use with power switch locked on.
• Properly maintain and inspect
to avoid electrical shock.
14. WARNING: Some dust created by power sanding,
sawing, grinding, drilling, and other construction
activities, contains chemicals known [to the State
of California] to cause cancer, birth defects or
other reproductive harm. Some examples of these
chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and cement or other
masonry products
• Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to filter
out microscopic particles.
(California Health & Safety Code § 25249.5,
et seq.
)
15. WARNING: Handling the cord on this product’s charger
will expose you to lead, a chemical known to the State
of California to cause cancer, and birth defects or other
reproductive harm. Wash hands after handling.
(California Health & Safety Code § 25249.5,
et seq.
)
16. The warnings, precautions, and instructions discussed
in this instruction manual cannot cover all possible
conditions and situations that may occur. It must
be understood by the operator that common sense
and caution are factors which cannot be built into
this product, but must be supplied by the operator.
Vibration Safety
This tool vibrates during use. Repeated or
long-term exposure to vibration may cause
temporary or permanent physical injury,
particularly to the hands, arms and shoulders. To
reduce the risk of vibration-related injury:
1. Anyone using vibrating tools regularly or for an
extended period should first be examined by a
doctor and then have regular medical check-ups to
ensure medical problems are not being caused or
worsened from use. Pregnant women or people who
have impaired blood circulation to the hand, past
hand injuries, nervous system disorders, diabetes,
or Raynaud’s Disease should not use this tool. If
you feel any symptoms related to vibration (such
