Page 13
For technical questions, please call 1-888-866-5797.
Item 69343
troubleshooting
problem
possible causes
Likely Solutions
Heat Gun will
not turn on�
1� Cord not connected�
2� No power at outlet�
3� Power Button set to OFF�
4� Internal damage or wear�
(Switch, for example�)
1� Check that cord is plugged in�
2� Check power at outlet� If outlet is
unpowered, turn off tool and check
circuit breaker� If breaker is tripped,
make sure circuit is right capacity for
tool and circuit has no other loads�
3� Press Power Button once for low
setting and again for High setting�
4� Have technician service tool�
Temperature
not at desired
setting
1� Power Button at
incorrect setting�
2� Heat Gun not allowed enough
time to reach heat level�
1� Press Power Button until desired
setting (high or low) LED turns on�
2� After increasing heat setting,
wait for a minute for the gun to
reach the desired heat level�
Unsatisfactory
results�
Inappropriate heat for task�
Adjust heat setting or distance to
workpiece to compensate�
Follow all safety precautions whenever diagnosing or
servicing the tool. Disconnect power supply before service.
