Page 4
For technical questions, please call 1-800-444-3353.
SKU 90599
16. Wear ANSI-approved safety goggles
and heavy-duty work gloves during
installation. Do not wear jewelry or
metal watches when working near
solar panels, wiring or batteries.
17. Handle panel with care. Glass
may break or a sharp edge may be
exposed during movement.
18. Keep installation area clean and well
lit.
19. Install out of reach of children.
20. Keep bystanders out of the area
during installation.
21. Do not install when tired or when
under the influence of drugs or
medication.
22. Use in 12 VDC systems only.
Battery precautions
23.
Wear splash-resistant AnSI-
approved safety goggles and
electrically insulated gloves while
working near batteries.
24.
use an appropriate charge
controller whenever connected to
battery.
25. Charge, store, and maintain batteries
according to supplier’s instructions.
Service precautions
1.
Before service, maintenance, or
cleaning:
a.
dry solar panels and outdoor
wiring thoroughly while wearing
electrically insulated gloves.
b.
cover all solar panels with an
opaque cover, such as a blanket.
c.
disconnect all solar panels.
d.
disconnect all batteries.
2.
do not service during rain, fog, or
any other wet/humid weather.
3.
do not stand on or otherwise apply
pressure to panel.
4. Do not allow children to play with
or near this item or electrical
components.
5. Inspect at least monthly; do not use
if damaged, parts are loose, water is
found inside the housing, electrical
insulation is cracked or damaged, or
connections are loose.
6. Maintain product labels and
nameplates. These carry important
safety information. If unreadable or
missing, contact Harbor Freight Tools
for a replacement.
7. WARNING: Handling the cord on
this product will expose you to lead,
a chemical known to the State of
California to cause cancer, and
birth defects or other reproductive
harm. Wash hands after handling.
(California Health & Safety Code §
25249.5,
et seq.
)
SAve TheSe
InSTRucTIOnS.
