background image

SKU 93690

    Page 4

17. Do not operate tool if under the influence of alcohol or drugs.  Read

warning labels if taking prescription medicine to determine if your judgment or
reflexes are impaired while taking drugs. If there is any doubt, do not operate
the tool.

18. Maintenance.  For your safety, service and maintenance should be performed

regularly by a qualified service technician.

Note: Performance of this tool may vary depending on variations in battery power.

Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It
must be understood by the operator that common sense and caution are factors
which cannot be built into this product, but must be supplied by the operator.

Unpacking

When unpacking, verify that the following parts are included. If any parts are
missing or broken, please call Harbor Freight Tools at the number on the cover of
this manual.

Operation

Battery Precautions

1.

To avoid accidents, only charge the supplied batteries.  Do not use a different

charger adapter with this tool.

2.

Do not expose the battery to rain or wet conditions.

3.

To avoid damage of cable and plug, never pull the cable to disconnect the

charger.

4.

Do not charge the battery if either the cable or plug are damaged.

5.

Repairs should be carried out by a qualified service technician only.

6.

Do not touch the battery poles with any conductive source.

7.

Do not store the battery in a box with other metal objects.

8.

Do not throw the battery in a fire.

Cordless Screwdriver

Charger Adapter

Warning:  People with pacemakers should consult their physician(s) before using
this product.  Electromagnetic fields in close proximity to a heart pacemaker could
cause interference to or failure of the pacemaker.

Summary of Contents for 93690








Reviews: