SKU 94987
For technical questions please call 1-800-444-3353.
Page 7
Unpacking
When unpacking your Spotlight, check to make sure that all parts listed in the parts list on page 9
are included. If any parts are missing or broken, please call HARBOR FREIGHT TOOLS at 1-800-
444-3353. It is important that you read the entire manual to become familiar with the product
BEFORE you operate and use the Spotlight.
Assembly
Your Spotlight comes completely assembled. Only maintenance such as bulb replacement and
battery replacement may be required.
Operation
Charging the Battery using the Adapter
The Spotlight will require fully charging before the first use.
1.
Move the ON/OFF Switch to the OFF position. Remove the AC Charger Plug (8) from the
storage compartment in the rear of the Spotlight. Plug the AC Charger Plug (8) into the Jack
located on the side of the Spotlight-see Figure 1. Plug into an electrical socket.
2.
Allow the Spotlight to charge for up to ten to twelve hours during initial charge.
3.
During charging the red LED will light up.
4.
When fully charged, the green LED light will light up.
5.
Unplug the AC Charger Plug (8) from the Spotlight. Unplug AC Charger Plug (8) from the
electrical outlet. Never operate the Spotlight with the AC Charger Plug plugged in.
Charging the Battery using the Car Plug Adapter
1.
Remove the Car Plug Adapter (7) from the storage compartment in the rear of the Spotlight.
Move the ON/OFF Switch to the OFF position.
2.
Plug the Car Plug Adapter (7) into your vehicle’s cigarette lighter. Plug the Car Plug Adapter
into the Jack on the Spotlight-see Figure 1.
3.
During charging the red LED will light up.
4.
When fully charged, the green LED light will light up.
5.
Remove the Car Plug Adapter from the cigarette lighter and the jacket on the Spotlight.
Never operate the Spotlight with the car Plug Adapter plugged in.
Charging Jack
On/Off Switch
Figure 1
