SKU 94987
For technical questions please call 1-800-444-3353.
Page 8
Replacing the Bulb
1.
Remove the five Torx #10 screws located in the Lens Cover (11).
2.
Pinch and remove the Light Bulb Clip (10) holding the Light Bulb (1) in place-see Figure 2.
3.
Remove both ends of the Light Bulb (1) by lifting the bar connecting the Light Bulb (1) to the
main wire-see Figure 3.
4.
Replace the Light Bulb (1) by connecting it to the main wire as indicated in Step 3.
5.
Set the Light Bulb in place. Pinch and insert the Light Bulb Clip (10) into place.
6.
Replace the Lens Cover (11) and tighten all five screws.
Light Bulb Clip (10)
main wire
Light
Bulb (1)
Figure 2
Figure 3
Lens Cover (11)
Replacing the Battery
1.
Unscrew and remove the Battery Cover (9). Pull out the Battery (2) as in Figure 4.
2.
Grasp and gently disconnect the wires attaching the Battery to the Spotlight. Replace the
Battery (2) with a 12 VDC, Lead-acid, 7 Ah battery.
3.
Line up the Battery Cover (9) with the marks on the Spotlight body and screw back on.
4.
Make certain to reconnect the positive red and negative black wires to the Battery as
indicated.
Negative wire
positive wire
Battery (2)
Figure 4
Note: Do not touch the bulb at any time. See Specific Safety Rule #6 on page 6.
Note:
Always dispose of or
recycle used batteries
properly. Contact your
local Hazardous Waste
Authority for proper battery
disposal guidelines.
REV 03/07
