Chicago Electric 95960, Set Up, Operating, And Servicing Instructions

Page 15

SKU 95960

For technical questions, please call 1-800-444-3353.

broken parts, loose hose connections, and any other condition that may affect the 

safe operation of the unit.  If abnormal noise or vibration occurs, have the problem 

corrected before further use.

GENERATOR MAiNTENANcE

Keep the Generator clean and dry at all times.

1. 

The Generator should not be operated or stored in locations that include exces-

2. 

sive moisture, dust, flammable or corrosive vapors.  If these substances are on the 

Generator, clean with a soft cloth or brush.
Do not use a garden hose or anything with liquid to clean the Generator.  Liquid 

3. 

may enter the cooling air slots and could damage the interior workings of the Gen-

erator.

ENGiNE MAiNTENANcE

After the first 5 to 8 hours of use:  

1. 

Change the oil.  Then, change the oil every 

50 hours of use.  Change the oil every 25 hours of use when operating the Engine 

under a heavy load or in high temperatures.

PLuG (59A)

OiL diPSTicK (65A)

FiGuRE G

2.  To change the oil, remove the Plug (59A) and allow the old oil to drain in a proper 

container.  Once drained, replace the Plug.  

(See Figure G.)

NOTE:  

3. 

If the Engine will be run in temperatures above 32 degrees Fahrenheit, 

use 

SAE 30

 weight oil.  If the Engine will be run in temperatures below 32 degrees 

Fahrenheit, use 

SAE 5W-30

 weight oil.

To add engine oil, unscrew and remove the Oil Dipstick (65A).  Pour engine oil into 

4. 

the Dipstick Hole until the level of oil is even with the top edge of the Dipstick Hole.  

Then, make sure to screw the Oil Dipstick back into its Dipstick Hole. 

(See Figure G.)