Page 4
SKU 97114
For technical questions, please call 1-800-444-3353.
moving parts, breakage of parts
and any other condition that may
affect the power tool’s operation.
if damaged, have the power
tool repaired before use.
Many
accidents are caused by poorly
maintained power tools.
Keep cutting tools sharp and
f.
clean.
Properly maintained cutting
tools with sharp cutting edges are
less likely to bind and are easier to
control.
use the power tool, accessories
g.
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions
and the work to be performed.
Use of the power tool for operations
different from those intended could
result in a hazardous situation.
Service
5.
Have your power tool serviced by
a.
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
Heat gun Safety Warnings
Hidden areas behind walls,
1.
ceilings, floors, soffit boards,
and other panels may contain
flammable materials that could
be ignited by the heat gun when
working in these locations.
The
ignition of these materials may not
be readily apparent and could result
in property damage and injury to
persons. When working in these
locations, keep the heat gun moving
in a back-and-forth motion. Lingering
or pausing in one spot could ignite
the panel or the material behind it.
Extreme care should be taken
2.
when stripping paint.
The peelings,
residue and vapors of paint may
contain lead, which is poisonous.
Any pre-1977 paint may contain
lead and paint applied to homes
prior to 1950 is likely to contain
lead. Once deposited on surfaces,
hand-to-mouth contact can result in
the ingestion of lead. Exposure to
even low levels of lead can cause
irreversible brain and nervous system
damage; young and unborn children
are particularly vulnerable. Before
beginning any paint removal process
you should determine whether the
paint you are removing contains lead.
This can be done by your local health
department or by a professional
who uses a paint analyzer to check
the lead content of the paint to be
removed.
LEAD BASED PAINT
SHOULD ONLY BE REMOVED BY
A PROFESSIONAL AND SHOULD
NOT BE REMOVED USING A HEAT
GUN.
Exercise CAUTION when using
3.
this product outdoors.
To reduce
the risk of electric shock, keep
extension cord connection dry and off
the ground.
Persons removing paint should
4.
follow these guidelines:
Move the work piece outdoors. If
a.
this is not possible, keep the work
area well ventilated. Open the
windows and put an exhaust fan
in one of them. Be sure the fan is
moving the air from inside to outside.
Remove or cover any carpets, rugs,
b.
furniture, clothing, cooking utensils
and air ducts.
