Page 3
For technical questions, please call 1-800-444-3353.
SKU 98107
saVe tHis Manual
Keep this manual for the safety warn-
ings and precautions, assembly, operat-
ing, inspection, maintenance and cleaning
procedures. Write the product’s serial
number in the back of the manual near the
assembly diagram (or month and year of
purchase if product has no number). Keep
this manual and the receipt in a safe and
dry place for future reference.
iMpOrtant saFetY
inFOrMatiOn
in this manual, on the labeling,
and all other information provid-
ed with this product:
this is the safety alert
symbol. it is used to alert
you to potential personal
injury hazards. Obey all
safety messages that
follow this symbol to avoid
possible injury or death.
danger indicates
a hazardous
situation which, if not
avoided, will result in death or
serious injury.
warning
indicates a
hazardous situation which, if
not avoided, could result in
death or serious injury.
cautiOn, used
with the safety
alert symbol, indicates a
hazardous situation which, if
not avoided, could result in
minor or moderate injury.
nOtice is used to
address practices
not related to personal injury.
cautiOn, without
the safety alert
symbol, is used to address
practices not related to
personal injury.
general power tool safety
warnings
warning read all safety
warnings and instructions.
Failure to follow the warnings and
instructions may result in electric
shock, fire and/or serious injury.
save all warnings and
instructions for future reference.
The term ″power tool″ in the
warnings refers to your mains-
operated (corded) power tool or
battery-operated (cordless) power
tool.
work area safety
1.
Keep work area clean and well lit.
a.
Cluttered or dark areas invite acci-
dents.
do not operate power tools in
b.
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust.
Power tools create
sparks which may ignite the dust or
fumes.
Keep children and bystanders
c.
away while operating a power tool.
Distractions can cause you to lose
control.
electrical safety
2.
power tool plugs must match the
a.
outlet. never modify the plug in
any way. do not use any adapter
