SKU 98912
For technical questions, please call 1-800-444-3353.
Page 6
To reduce vibration, maintain tool as
7.
explained in this manual. If abnormal
vibration occurs, stop immediately.
SavE THESE
inSTRuCTiOnS.
SpECiFiCaTiOnS
Electrical
Requirements
Power Source: 19.2 VDC Battery
Battery Type: NI/CD Rechargeable
Charge Time: 1 Hour with Auto Cut-Off
Charger Type: Class 2 Charger
Charger Input: 120 V~ / 60 Hz / 80 W
Charger Power Plug Type: 2-Prong, Polarized
Cutting
Capacity
18 Gauge Steel / 20 Gauge Stainless Steel
Approximate
Run Time
35 Minutes
Activation
Method
Squeeze Trigger
Cutter Head
Swivel
Adjustable in four positions
(Up, Down, Left, Right)
Strokes
Per Minute
2000
Accessories
Carrying Case (Qty. 1)
Hex Wrench (Qty. 1)
unpaCking
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown throughout the manual as soon as
possible.
pRODuCT FEaTuRES
Read the EnTiRE impORTanT
SaFETY inFORmaTiOn
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
note:
For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
FiguRE a
SHEaR HEaD
(16)
TRiggER
(8)
BaTTERY
(18)
LOCk SWiTCH
(7)
BaTTERY
COnnECTOR
BuTTOn
CaRRYing
STRap
OpERaTing inSTRuCTiOnS
Read the EnTiRE impORTanT
SaFETY inFORmaTiOn
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
inspect the Cordless Swivel
Shear before use. Check for
damaged, loose, and missing
parts. if any problems are
found, do not use tool until
repaired.
TO
pREvEnT
SERiOuS injuRY FROm
aCCiDEnTaL OpERaTiOn:
Turn off the Shear and
remove its Battery (18) before
performing any inspection,
maintenance, or cleaning
procedures.
TO pREvEnT SERiOuS
injuRY:
Do not adjust or tamper with
