SKU 99683
for technical questions, please call 1-800-444-3353.
Page 11
troubleshooting
problem
possible causes
likely solutions
Tool will not start
Battery discharged.
1.
Recharge battery.
1.
Battery does not
charge
No power at outlet.
1.
Charger defective.
2.
Battery defective.
3.
Check outlet for faults.
1.
Replace charger.
2.
Replace battery.
3.
Drive speed drops
during use
Too much pressure on tool
1.
Apply less pressure to tool.
1.
Bit does not turn
Forward/Reverse switch in
1.
center.
Bit is not firmly in collet.
2.
Move switch to desired operation position.
1.
Follow directions in Maintenance section to
2.
adjust the bit.
follow all safety precautions whenever diagnosing or servicing the
tool. disconnect power supply before service.
please read tHe following carefullY
THE MANuFACTuRER AND/oR DiSTRiBuToR HAS PRoViDED THE PARTS LiST AND ASSEMBLy
DiAgRAM iN THiS MANuAL AS A REFERENCE TooL oNLy. NEiTHER THE MANuFACTuRER oR
DISTRIBUTOR MAKeS ANY RePReSeNTATION OR WARRANTY OF ANY KIND TO THe BUYeR THAT
HE oR SHE iS quALiFiED To MAKE ANy REPAiRS To THE PRoDuCT, oR THAT HE oR SHE iS
quALiFiED To REPLACE ANy PARTS oF THE PRoDuCT. iN FACT, THE MANuFACTuRER AND/
oR DiSTRiBuToR ExPRESSLy STATES THAT ALL REPAiRS AND PARTS REPLACEMENTS SHouLD
BE uNDERTAKEN By CERTiFiED AND LiCENSED TECHNiCiANS, AND NoT By THE BuyER. THE
BuyER ASSuMES ALL RiSK AND LiABiLiTy ARiSiNg ouT oF HiS oR HER REPAiRS To THE
oRigiNAL PRoDuCT oR REPLACEMENT PARTS THERETo, oR ARiSiNg ouT oF HiS oR HER
iNSTALLATioN oF REPLACEMENT PARTS THERETo.
