SKU 99702
For technical questions, please call 1-800-444-3353.
Page 13
Adjust the pressure control dial until
23.
a solid coat of paint of desired thick-
ness is achieved.
Painting Tips:
24.
Spray 10 to 12 inches from the
•
surface.
Begin moving the Gun before
•
squeezing the Trigger.
Release the Trigger before ending
•
the stroke.
Paint using short, even strokes.
•
Keep the spray gun at a right angle
•
to the painting surface.
Keep the tip of the spray gun paral-
•
lel to the ground.
Overlap each stroke by about 30%
•
to ensure an even coat.
When finished, turn the Power Switch
25.
to its “OFF” position. Point the Gun
into the waste container and squeeze
the Trigger to discharge Gun and
Hose pressure. Lock the Gun.
Disconnect the power supply after
26.
use. Clean, then store the tool in-
doors out of children’s reach.