background image

Page 3

SKU 97047

For technical questions, please call 1-800-444-3353.

generAl SAFetY ruleS

  wArning!  read all instructions

 

Failure to follow all instructions listed below may result in electric shock, 

fire, and/or serious injury.

  

SAve tHeSe inStruCtionS

work area safety

Keep work area clean and well lit.  

Cluttered or dark areas invite accidents.

Do not operate the Inverter in explosive atmospheres, such as in the 

presence of flammable liquids, gases or dust.  

Inverters may ignite the dust 

or fumes.

Keep children and bystanders away while operating the inverter.  

Distractions can cause you to lose control.

electrical safety

Inverter plugs must match the outlet.  Never modify the plug in any way.  Do 

not use any adapter plugs with grounded Inverters.  

Unmodified plugs and 

matching outlets will reduce risk of electric shock.

Avoid body contact with grounded surfaces such as pipes, radiators, ranges 

and refrigerators.  

There is an increased risk of electric shock if your body is 

grounded.

Do not expose the inverter to rain or wet conditions.  

Water entering an 

inverter will increase the risk of electric shock.

Do not abuse the cord.  never use the cord for carrying, pulling or 

unplugging the inverter.  Keep cord away from heat, oil, sharp edges or 

moving parts.  

Damaged or entangled cords increase the risk of electric 

shock.

When operating outdoors, use an extension cord suitable for outdoor use.  

Use of a cord suitable for outdoor use reduces the risk of electric shock.

personal safety

Stay alert, watch what you are doing and use common sense when 

operating this product.  Do not use the Inverter while you are tired or under 

the influence of drugs, alcohol or medication.  

A moment of inattention while 

operating the Inverter may result in serious personal injury.

use safety equipment.  Always wear eye protection.  

Safety equipment 

such as work gloves and protective, electrically nonconductive clothes 

used for appropriate conditions will reduce personal injuries.

Avoid accidental starting.  Ensure the switch is in the off-position before 

plugging in.  

Plugging tools in with the switch on invites accidents.

Dress properly.  Do not wear loose clothing or jewelry.  Keep your hair, 

clothing and gloves away from moving parts.  

Loose clothes, jewelry or long 

hair can be caught in moving parts.

1.

a.
b.

c.

2.

a.

b.

c.

d.

e.

3.

a.

b.

c.

d.

Summary of Contents for Power Systems 97047














Reviews: