Page 4
SKU 97047
For technical questions, please call 1-800-444-3353.
inverter use and care
Do not force the Inverter. Use the correct Inverter for your application.
The
correct Inverter will do the job better and safer at the rate for which it was
designed.
Do not use the Inverter if the switch does not turn it on and off.
Any product
that cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source before making any
adjustments, changing accessories, or storing.
Such preventive safety
measures reduce the risk of starting the inverter accidentally.
Store the inverter out of the reach of children and do not allow persons
unfamiliar with the inverter or these instructions to operate it.
inverters
are dangerous in the hands of untrained users.
Maintain the Inverter. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the Inverter’s
operation. If damaged, the Inverter must be repaired before use.
Many
accidents are caused by poorly maintained Inverters.
Use the Inverter in accordance with these instructions and in the manner
intended for the particular type of product, taking into account the working
conditions and the work to be performed.
Use of the Inverter for operations
different from those intended could result in a hazardous situation.
Service
Have the Inverter serviced only by a qualified repair person using only
identical replacement parts. This item does not have any user-replaceable
parts.
SpeCiFiC SAFetY ruleS
Maintain labels and nameplates on the Inverter. These carry important safety
information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
A vehicle’s engine must never be used in any enclosed structure. Carbon
monoxide is produced during operation and is deadly in a closed environment.
Early signs of carbon monoxide poisoning resemble the flu, with headaches,
dizziness, or nausea. If you have these signs, get fresh air immediately.
Avoid unintentional starting. Prepare to begin work before turning on the tool.
guard against electric shock
.
Do not open the metal case; risk of
electric shock.
prevent body contact with grounded surfaces
such as pipes, radiators, ranges, and refrigerator enclosures
during installation. Connect all wires securely.
Store tools and metal
objects away from the inverter.
Do not leave the tool unattended when it is plugged into an electrical outlet.
Turn off the tool, and unplug it from its electrical outlet before leaving.
4.
a.
b.
c.
d.
e.
f.
.
a.
1.
2.
3.
4.
.
