background image

1

964.759.00.0 (00)

Geberit Tessera

TM

Toilet System

INSTALLATION INSTRUCTIONS

Geberit Manufacturing, Inc.

1100 Boone Drive, Michigan City, IN 46360

www.us.geberit.com

Phone: 219 / 879-4466 • Fax: 219 / 872-8003

For Technical Assistance 800 / 225-7217

2100 Clearwater Drive, Des Plaines, IL 60018-5999
www.chicagofaucets.com
Phone: (847) 803 5000 • Fax: (847) 298-3101
For Technical Assistance 800 / TEC-TRUE (800-832-8783)

Copyrights

© 2005 Geberit. All rights reserved. The information in this
manual is subject to change without notice.

Notice to Installers

Please leave this manual with the facility manager after completing
the Tessera

TM

Toilet System Installation. This document contains

information necessary for routine maintenance and servicing.

TABLE OF CONTENTS

Product Overview....................................................

2

Features...................................................................

2

In Compliance with..................................................

2

Available Options.....................................................

2

How to Order............................................................ 2

Technical Support..................................................... 2

Product Specifications.............................................. 2

Installation Requiremenst.......................................... 2

Safety Information...................................................... 3

Dimensions............................................................. 3-4

Tank & Carrier Installation....................................... 4-5

Wall Hung Bowl Installation.................................... 6-7

Access Panel Flush Actuator Installation............... 8-9

Component Identification.................................... 10-11

Troubleshooting Guide............................................. 12

Warranty.................................................................... 12

ADA Compliant

Summary of Contents for Geberit Tessera











Reviews: