Golden
Tee®
Fore!
–home
version
Version
03/06
Page
6
3. After the latches are released grasp the bottom of the panel and gently pull up and out about six inches until
the panel stops are reached, then locate the video connector and separate the connection. The A/C power
connector for the power supply must also be disconnected.
4. Now that the wiring is disconnected it is safe to remove the panel. Close the control panel and grasp the
assembly from the bottom and lift about one inch to disengage the stops and pull outward until the panel is
clear of the cabinet.
To reinstall simply reverse the procedures making sure that the video and power connections are tightly
connected, and NEVER force either the connectors or the panels together.