EN
page
11 - 21
Instructions for use
1. Attention
2. Instruction manual
2.1. To start a vehicle
2.2. Inversion of polarity
2.3. Vehicle 24V - Detection of the 24V
2.4. Starting attempt
2.5. Protection
2.6. Storage
3. General information
3.1. Description
3.2. Voltmeter
3.3. Alternator Testing
3.4. Recharge the Booster using the AC 230V or 110V/DC 12V charger
3.5. Recharging on board of a vehicle 12V
4. Preventing premature failure of your Booster battery
4.1. Recharging
4.2. Starting
4.3. Remark
5. Electronic components of vehicles
5.1. History
5.2. Car manufacturers’ recommendations
5.3. High voltage surge
6. Questions – Answers
6.1. My Booster
6.2. General
1 Attention
□
The following instruction MUST be read prior to operating the Booster; failure in doing so may result
in damage to the unit or serious injury.
□
Always use the Booster in well ventilated areas, and wear eye protection.
□
Recharge your Booster after receipt 24 hours before using or storing the unit.
2. Instruction manual
2.1. To start a vehicle
IMPORTANT, the following instructions MUST be followed.
Turn OFF ignition before using the Booster.
11
