1-
Specifications
CP9302 CP9306 CP9312 CP9316
CP9320
Capacity
[t]
2 6 12
16 20
A
[mm] 160 200 245 250 250
B
[mm] 100 134 175 175 175
C
[mm] 58 79 80 80 80
D
[mm] 260 333 420 426 505
E
[mm] 90 115 138 145 156
F
[mm] 93 112 144 160 161
G
[mm] 23 32 48 53 53
Weight
[kg]
2,3 4,4 8,5 10,4 11
1.1-
Measurements
2-
Starting operation
2.1- Preparation
First, remove the wrapping of the hydraulic jack and check whether the unit was damaged during its transport or whether there
are any missing parts. The wrapping material must be disposed of in accordance with the national environmental protection
laws.
2.2- Using the jack
Before using the jack for the first time, its hydraulic circuit must be bled. Insert one end of the pump lever with both notches onto
the valve screw, and turn the lever counter-clockwise (open). Then, pump several times. Turn the valve screw clockwise until it
is completely closed; the jack is ready to be used.
3- Maintenance
•
The movable part must be greased regularly.
•
Always keep the jack clean; keep it away from harsh chemicals/environments.
•
When changing or re-filling the oil, fill the tank up to the filling plug.
•
Visual checks (in the area of the welding seams) must be carried out regularly.
ATTENTION: Too much oil can stop the jack operation.
Only use oil of type HPLD 22. Never use brake fluid.
Amount of oil
CP9302 CP9306 CP9312 CP9316 CP9320
Liter 0,05 0,15 0,3 0,38 0,47
- 7 -