Air motors
Safety Information
© Chicago Pneumatic - 6159927880
5
Noise hazards
• High sound levels can cause permanent hearing loss and
other problems such as tinnitus. Use hearing protection
as recommended by your employer or occupational
health and safety regulations.
• To prevent unnecessary increases in noise levels operate
and maintain the tool, and select, maintain and replace
the accessories and consumables, in accordance with this
instruction manual.
Workplace hazards
• Slip/Trip/Fall is a major cause of serious injury or death.
Be aware of excess hose left on the walking or work sur-
face.
• Avoid inhaling dust or fumes or handling debris from the
work process which can cause ill health (for example,
cancer, birth defects, asthma and/or dermatitis). Use dust
extraction and wear respiratory protective equipment
when working with materials which produce airborne
particles.
• Some dust created by power sanding, sawing, grinding,
drilling and other construction activities contains chemi-
cals known to the State of California to cause cancer and
birth defects or other reproductive harm. Some examples
of these chemicals are:
• Lead from lead based paints
• Crystalline silica bricks and cement and other ma-
sonry products
• Arsenic and chromium from chemically-treated rub-
ber
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your ex-
posure to these chemicals: work in a well ventilated area,
and work with approved safety equipment, such as dust
masks that are specially designed to filter out micro-
scopic particles.
• Proceed with care in unfamiliar surroundings. Be aware
of potential hazards created by your work activity. This
tool is not insulated from coming into contact with elec-
tric power sources.
DO NOT DISCARD – GIVE TO USER
Useful Information
Website
Information concerning our Products, Accessories, Spare
Parts and Published Matters can be found on the Chicago
Pneumatic website.
.
Country of origin
Hungary
Safety Data Sheet
The Safety Data Sheets describe the chemical products sold
by Chicago Pneumatic.
Please consult the Chicago Pneumatic website for more in-
formation
Copyright
© Copyright 2019, CHICAGO PNEUMATIC Tool Co. LLC,
1815 Clubhouse Road, Rock Hill, SC 29730 - USA
All rights reserved. Any unauthorized use or copying of the
contents or part thereof is prohibited. This applies in particu-
lar to trademarks, model denominations, part numbers and
drawings. Use only authorized parts. Any damage or mal-
function caused by the use of unauthorised parts is not cov-
ered by Warranty or Product Liability.
Caractéristiques techniques
Caractéristiques techniques
Débit d’air à la puissance maxi. (l/s)
5.3
Débit d’air à la puissance maxi. (cfm)
11.2
Vitesse à vide (tr/min)
5500
Puissance de sortie maxi. (kW)
0.25
Puissance de sortie maxi. (cv)
0.32
Couple de départ mini. (Nm)
2.3
Couple de départ mini. (ft.lb)
1.7
Broche de sortie (mm)
Broche de sortie (po.)
3/8"-24 UNF
Couple de calage (Nm)
Couple de calage (ft.lb)
Couple à la puissance maxi. (Nm)
9.9
Couple à la puissance maxi. (ft.lb)
7.1
Poids (kg)
0.75
Poids (lb)
1.66
Déclarations
DÉCLARATION D'INCORPORATION UE
Nous soussignés
CHICAGO PNEUMATIC Tool Co.
LLC
, 1815 Clubhouse Road, Rock Hill, SC 29730 - USA,
déclarons que ce produit (dont le nom, le type et le numéro
de série figurent en première page) répond aux exigences es-
sentielles de la directive 2006/42/CE relative aux machines et
ne doit pas être mis en service tant que la machine finale
dans laquelle il doit être incorporé n'a pas été déclarée con-
forme à ladite directive. Il est également en conformité avec
la ou les directives suivantes :
2006/42/EC (Annex I, clauses 1.1, 1.2 (excluding 1.2.4.3),
1.3, 1.4, 1.5, 1.6, 1.7)
Normes harmonisées appliquées :
DIN EN 4414:2010, DIN EN ISO 12100:2010
