background image

SKU 42708 

For technical questions, please call 1-800-444-3353.

REV 07f, 09b, 09g

If the tire pressure is too low, note the difference 

4. 

between the measured tire pressure and the 

correct tire pressure. These “missing” pounds 

of pressure are what you will need to add.

At a service station, add the missing pounds of 

5. 

air pressure to each tire that is underinflated.

Check all the tires to make sure they have the 

6. 

same air pressure.

If the tires’ pressure was not measured “cold”, 

7. 

then the pressure should be rechecked with 

the tires cold as soon as possible.

Tire Size

To maintain safety, only purchase new tires 

of the same size as the original tires.  Look at the Tire 

and Loading Information Placard, the Specifications 

Chart in this manual, or the sidewall of the tire being 

replaced.  If you have any doubt about selecting the 

correct size, consult a tire dealer.

Tire Tread

The tire tread provides traction that prevents 

your vehicle from slipping, especially if the road is wet 

or icy.  Tires are unsafe and should be replaced when 

the tread is worn down to 1/16”.  Measure tread depth 

using a tread depth indicator (not included).

Tire Rotation

Every  5,000  miles  the  left  and  right  tires 

should be switched.  This will cause the tires to wear 

more evenly and last longer.

Tire Balance and alignment

The  tires  need  to  be  balanced  to  prevent 

vibration when driving.  This involves attaching small 

weights to the rim to offset small differences in rim 

and tire weight.  The tires also need to be aligned 

properly.  Alignment is the orientation of the tires to 

the road surface and their being parallel.  This helps 

the tires to wear evenly, and provide better traction.  

Both tire balance and alignment require specialized 

equipment that is not provided with this vehicle.

Tire Repair

To properly repair a punctured tire, the hole 

needs to be properly plugged and patched from the 

inside of the tire.  Tread punctures can be repaired 

if they are not too large.  Sidewall punctures should 

not be repaired, the tire needs to be replaced if the 

sidewall is damaged.  Tires should be removed from 

the rim to be inspected before being plugged  and 

patched.  A qualified mechanic should remove the 

tire  from  the  rim,  perform  the  repair,  and  remount 

the tire.

VEHiCLE LoaD LimiT

Steps for Determining Correct 

Load Limit

Locate  the  statement  “The  weight  of  cargo 

1. 

should never exceed XXX kilograms or XXX 

pounds” on your vehicle’s placard.

That  figure  equals  the  available  amount  of 

2. 

cargo and luggage load capacity.

Determine the combined weight of luggage and 

3. 

cargo being loaded on the vehicle. That weight 

may not safely exceed the available cargo and 

luggage load capacity.

If  the  trailer’s  load  exceeds  the  cargo  and 

4. 

luggage  load  capacity,  then  the  trailer  be 

unsafe  resulting  in  hazardous  effects,  such 

as:  Trailer’s tires will not be able to maintain 

traction properly, and stopping distance will be 

increased significantly.

Summary of Contents for 42708
























Reviews: