Chicco KWIK.ONE, Instructions For Use Manual

12

the moving parts of the stroller will 

not come into contact with your child.

•  Make sure that the person using the 

stroller knows how to operate it in 

the safest way.

•  This product must only be used by 

an adult.

•  The product must be assembled by 

an adult.

•  To avoid all risks of strangling, never 

give children objects with cords or 

strings attached, or leave them with-

in proximity of such objects.

•  Never use the stroller on staircases or 

escalators: you could suddenly lose 

control of it.

•  Always pay attention when going 

up and down steps or pavements.

•  If the stroller has been exposed directly 

to sunlight for a long time, you must 

let it cool down before placing your 

child inside of it. Prolonged exposure 

to direct sunlight may cause the colour 

of the materials and fabric to fade.

•  Prevent the stroller from contact with 

salty water. It might cause the forma-

tion of rust.

•  Do not use the stroller on the beach.

•  When unused, the stroller should be 

kept out of reach of children.

TIPS FOR CLEANING AND MAINTENANCE

WARNING:

 This product requires regular periodical mainte-

nance. The cleaning and maintenance of the product must 

only be carried out by an adult.

CLEANING

Clean the fabric parts using a wet sponge and neutral soap. The 

stroller seat lining can be removed (please refer to the section 

“Fitting/removing seat lining”). Please refer to the care labels 

for instructions on how to clean the fabric parts. Below are the 

cleaning symbols and their meanings: 

Hand wash 

Do not bleach 

Do not tumble dry 

Do not iron 

Do not dry clean

Routinely wipe clean plastic parts with a soft damp cloth. Never 

use solvents or abrasive detergents. Always dry the metal parts 

to prevent the formation of rust if the folding cot has come into 

contact with water.

MAINTENANCE

Lubricate the moving parts only if necessary, with a light applica-

tion of a silicone based lubricant. Regularly check the condition 

of the wheels and, keep them clean from dust and sand. Make 

sure that all plastic parts that slide on the metal tubes are clean 

from dust, dirt and sand, in order to avoid frictions that may 

compromise the optimal performance of the stroller. Keep the 

stroller in a dry place.

WARNING:

 the elements described may not be available 

for some versions of this product. Please read carefully the 

instructions on the accessories/components available for the 

model purchased.

OPENING AND FIRST ASSEMBLY

1.  Completely open the stroller frame (Fig. 1- 1A) until you 

hear a click.

2.  Fit the front wheels on the relevant pins of the frame (Fig. 2), 

making sure that the lever of the swivel system is positioned 

downward. Repeat the operation for the other front wheel.

WARNING:

 Before use, ensure that the wheels are locked 

correctly.

3. To assemble the wheels on the rear axle, fit the following parts 

in the correct order (Fig. 3):

• wheel (A) 

• washer (B) 

• spring pin (C)

• plug (D)

Make sure you insert the fastening spring pin as indicated in the 

diagram: the straight side must be inserted in the hole in the 

pin. Repeat this operation also for the other wheel, following 

the same sequence. 

4.  Fit the rear axle into relevant slots in the frame until you hear 

it click into place (fig. 4).  

WARNING:

 Before using ensure that the wheels and rear axle 

are correctly attached.

5.  Fit the storage basket by wrapping the front straps around 

the sides of the tube of the seat (fig. 5); wrap the fabric around 

the rear tube and close the fasten the snap buttons along 

the entire perimeter of the rear tube (fig. 5A);  complete the 

step by passing the rear straps in the relevant plastic slots in 

the base of the rear leg tubes (5B).

6.  To fit the hood, fasten the plastic clips to the frame’s tubes 

matching the holes in the clips with the pins on the tubes 

(fig. 6), fasten the zipper to the fabric flap on the back of the 

backrest (fig. 6A) and close the Velcro strap on both handle 

tubes (fig. 6B). 

7.  Insert the bumper bar in the dedicated slots until they click 

into place (Fig. 7). To remove the bumper bar, press the two 

side buttons and pull towards you (Fig. 7A). 

WARNING:

 Never use the bumper bar to lift the stroller up 

with the child sitting in it.

SAFETY HARNESS

8.  This stroller has a five-point safety harness featuring two 

shoulder straps, two adjustment holes, a waist strap and a 

crotch strap with buckle.

WARNING:

 To use it with children from birth to approx. 6 months 

of age, you must use the shoulder straps by threading them first 

through the two adjusting holes (fig. 8).

After laying the child in the stroller, fasten the straps (Fig. 8A) 

by passing first the two forks (A) inside the shoulder strap 

buckle (B) and then inside the crotch strap buckle (C); Adjust 

30° C

30° C