2
Tuck the fabric into the groove at the top of the
headrest.
Push down gently on both of the plastic tabs at
the top of the Headrest until they snap into the grooves.
7
With the Headrest in the highest position, hook the
elastic strap
onto the
BACK
of the Headrest. Repeat this
step for the other elastic strap.
8
Place the Backrest Seat Pad
onto the Child Restraint.
1
Hook the elastic strap
onto the side hook and the top
hook located near the vehicle belt path. Repeat for the
other side.
2
Tuck the fabric into the groove gently
around the
Child Restraint. Repeat for the other side. Hook BOTH
elastic straps onto the back of the Child Restraint.
3
Slide the Armrest Fabric onto the armrest
then snap
the
Armrest Fabric to the Backrest Seat Pad. Repeat this
step for the other Armrest.
4
Hook the Armrest fabric loop
onto the side hook
located near the vehicle belt path. Repeat this step for the
other side.
5
Place the Headrest Fabric Pad
onto the Headrest.
6
Place the Seat Bottom Fabric onto the Child Restraint
and pull fabric around the Harness Adjuster Strap Cover.
Then pull the Crotch Strap UP through the fabric and pull
the FABRIC down and around the front and sides of the seat.
9
Match the “R” and “L” Cup Holders
to the Child
Restraint, and insert the Cup Holder. Make sure the Lip fits
behind the groove and it clicks into place. Repeat this step
for the other Cup Holder.
10
MyFit LE ONLY:
To attach the Padded Waist Belt,
wrap the pads around the Harness Waist Straps and attach
the hook and loop fastener on
BOTH
sides of the Padded
Waist Belt.
13
R
L
R
R
LIP
Replace the Crotch Strap Pad
by sliding the Harness
Buckle up through the Crotch Strap Pad. Then push the fabric
Tab through the slot on the
FRONT
of the Harness Buckle.
Then pull the Tab out of the
BACK
to secure it.
11
Re-attach Shoulder Pad
by folding the hook and loop
Tab over the Harness Strap. Secure both hook and loop
sides together. Repeat for the other Shoulder Pad and
make sure they are oriented, as shown.
12
SOFTGOODS INSTALLATION: