Chicology Ready-Made Blinds and Shades Warranty
Limited One Year Warranty f r o m t h e D a t e o f P u r c h a s e
What is Covered :
• All of our shades are warranted against manufacturer defects in materials or workmanship provided
that you are the original purchaser of the product, and the product was installed according to our
instructions.
What is Not Covered :
• Normal wear and tear.
• Consumer damages caused by accidents, alterations, abuse of the product, exposure to salt air,
misuse, or damages from pets or insects.
• Damages resulting from removal and reinstallation in the same or any other window or application,
or failure to follow instructions, such as measurement, installation, cleaning, and maintenance.
• Any products that, with the passage of time, has yellowing or cracking of plastic parts
• Wrong measurements are not covered by the warranty and are not refundable.
To report shipping damages :
If damage occurred during shipping, please email support@chicology.com immediately and report within
14 calendar days or else you may be denied for your damaged product.
Obligations to the consumer :
The obligations of Chicology are limited to the repair or replacements of parts or products found to
be defective. Chicology will determine if the product is defective or not and may replace the product.
If the product is found to have manufacture defects, we will repair or replace the product. Colors do
vary from lot to lot, and may not match original product exactly. Discontinued items will be replaced
with the most current product of the same price.
Your Rights under State law :
This limited warranty gives you specific legal rights, and you may have other rights, which vary from
state to state.
Contacting us :
If you believe your shade has a manufacturing defect, please email us at support@chicology.com
4
Attach Tilter and Wand
Quick How-to-use Guide
Questions
support@chicology.com
PHONE
866-999-6188
HOW - TO
www.chicology.com/how-to
HARDWARE
www.chicology.com/missing-hardware
To lower the blinds pull down from the
bottom to the desired height.
1. Insert the
tilter
into
the tilt control mechanism in
the
headrail
by aligning
and pushing into the unit
until it clicks and locks into
place.
2. Hook the
wand
through the hang hole in
the
tilter
.
3. Rotate the
wand
clockwise or
counterclockwise to open
or close the blind slats.
To raise the blind push up from the
bottom to the desired height
A
F
F
F
F
A
A
C
C
C
