MERCEDES UNIVERSAL ADAPTER
SERIES 124, 129, 140, 170, 202, 208, 210, & 220
1 Bolt, 1/2-13NC x 3, Gr. 8
2 Washer, 1/2
3 Washer, 2 1/2 x 13/16 ID x 1/8
4 Mercedes Uni. Adapter Base
5 Spacer, 1/8
6 Spacer, 1/4
7 Mercedes Pin Plate Adapter Ass’y
8 Outer Support Pin
9 Nut, 1/2-13NC, Gr. 8
(refer to part numbers — page 1)
Mercedes 210 Series
1
8
7
6
4
3
9
2
(Rev. 6/02)
Application Instructions:
1. Remove conventional clamp jaws.
2. Install pin plate adapter and universal adapter base on opposite sides of clamp.
IMPORTANT:
Insert 1/4 inch spacer between pin plate adapter and stand.
3. Install five washers (090784) on adapter base as shown.
4. Insert outer support pin into pin plate adapter.
5. Lower vehicle onto universal adapter base while guiding pins into jack holes.
8
