MERCEDES UNIVERSAL ADAPTER
SERIES 124, 129, 140, 170, 202, 208, 210, & 220
8
7
1
3
9
4
Mercedes 124 Series
2
Application Instructions:
1. Remove conventional clamp jaws.
2. Install pin plate adapter and universal adapter base to the same side of clamp.
3. Install five washers (090784) on adapter base as shown.
4. Insert outer support pin into pin plate adapter.
5. Lower vehicle onto universal adapter base while guiding pins into jack holes.
1
Bolt, 1/2-13NC x 3, Gr. 8
2
Washer, 1/2
3
Washer, 2 1/2 x 13/16 ID x 1/8
4
Mercedes Uni. Adapter Base
5
Spacer, 1/8
6
Spacer, 1/4
7
Mercedes Pin Plate Adapter Ass’y
8
Outer Support Pin
9
Nut, 1/2-13NC, Gr. 8
(refer to part numbers — page 1)
Rev. 6/02
2
1986-1989
