Installation Instructions
CMS491P2 / CMS492P2 / CMS491CP2 / CMS492CP2
9
11. Install faceplate (B) onto EGX-SF2 using one 6-32 x 1/2"
Phillips flat head screw and lock washer previously
removed from front of box. (See Figure 5) or (See Figure 7)
NOTE:
Make sure LED light on outlet box lines up with hole
location on faceplate (B). (See Figure 7)
Figure 7
Outlet Box Use
NOTE:
The “PROTECTED” light indicates that the surge
protection circuitry is active and operational.
Figure 8
11
(CMS491CP2 shown as example)
(B)
(housing box not shown for clarity)
lock washer
LED light
“PROTECTED”
indicator light
