3.
J-Series VESA Interface Installation:
Using the 10-24 button head cap screws along with the 10-24 Nylock
nuts (provided with J-Series mount), attach VESA interface from J-Series mount to center brackets (see
Figure 4 & Figure 5).
4.
Side Bracket Assembly:
Attach center brackets to side brackets using the 10-24 button head cap screws (see
Figure 6 & Figure 7).
5.
Bracket Installation:
Place four nylon spacers over mounting holes on back of screen. Attach mounting
brackets to display using the M8 screws, shoulder and steel washers (see Figure 8 & Figure 9). Do not over
tighten screws.
NOTE: Select nylon spacers to use based upon the type of device being mounted. The remaining four
spacers will not be used.
6.
Follow the Chief mount instruction manual for screen installation.
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9
