Installation Instructions
MSP-BBSP
1
IMPORTANT WARNINGS AND PRECAUTIONS!
WARNING:
A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.
CAUTION:
A
CAUTION
alerts you to the possibility of damage or destruction of equipment if you do not follow the corre-
sponding instructions.
•
WARNING: Improper installation can result in serious personal injury! Make sure that the structural members can
support a redundant weight factor five times the total weight of the equipment: if not, reinforce the struc-
ture before installing the mount.
•
WARNING: Be aware also of the potential for personal injury or damage to the unit if it is not adequately mounted.
•
WARNING: The installer is responsible for verifying that the wall to which the mount is anchored will safely support
the combined load of all attached components or other equipment
.
•
WARNING: The weight of the display placed on the mountmust not exceed 40 lbs. (18.1 kg), the maximum load capac-
ity of the mount
.
•
WARNING: Watch for pinch points. Do not put your fingers between movable parts.
•
WARNING: Make sure the mount and brackets are correctly oriented.
•
CAUTION:
Check the unit for shipping damage before you begin the installation.
CONTENTS
SPECIFICATIONS ....................................................1
TOOLS REQUIRED FOR INSTALLATION ..............1
DRAWINGS ..............................................................2
INSPECT THE UNIT BEFORE INSTALLING ...........3
iC-SP-TP1-01 INSTALLATION .................................3
ADJUSTMENTS .......................................................5
ADJUSTMENTS .......................................................5
SPECIFICATIONS
This mount accommodates all VESA® 75mm/100mm compli-
ant displays. Table 1 provides mount specifications.
TOOLS REQUIRED FOR
INSTALLATION
•
Electric drill and bit set
•
Phillips Screwdriver
•
Level
NOTE: Other tools may be required depending on the
mounting surface and method of installation.
Table 1: Specifications
Depth from Wall
3.34” (84.74mm)deep in the closed
position
Dimensions (WxHxD)
2-3/8”x 5-11/16” x 1-13/16”
(61 x 145 x 46 mm)
Tilt
+/-15 degrees
Pivot
180 degrees
Weight Capacity
40 lbs. (18.2 kg)
Summary of Contents for MSP-BBSP
Page 1: ......
