CHIEF MSP-DCCPPNR, Installation Instructions Manual

Installation Instructions

MSP-DCCPPNR

4

INSPECT THE UNIT BEFORE 
INSTALLING

WARNING: Watch for pinch points. Do not put your fin-

gers between movable parts.

1.

Carefully inspect the mount for shipping damage. If any 
damage is apparent, call your carrier claims agent and 
do not continue with the installation until the carrier has 
reviewed the damage.

NOTE:

  Read all instructions before starting installation.

2.

Lay out components to ensure you have all the required 
parts before proceeding.  See “DIMENSIONAL DRAW-
ING” on page 3.

MOUNT SPECIFICATIONS

Table 1 on page 4 provides the mount specificiations.

*

Dimension does not include the PSB interface bracket.

INTERFACES

Table 2 on page 4 provides the applicable mount interfaces.

TOOLS REQUIRED FOR
INSTALLATION

•

Allen wrench set

•

Drill and bit set

•

Wrench set

NOTE:

Other tools may be required depending on the

       method of installation.

PARTS LIST

Unpack the carton and verify the contents listed in Table 3 on 
page 4.  If you are missing any of the listed parts, contact 
Customer Service at: 1-800-582-6480.

Table 1: Mount Specifications

Model

Max Support Weight

mount 
Extended 
from Wall

mount

200 lbs. (90.72kg)

24-7/8”

*

Table 2: mount Interfaces

Model

Interfaces

mount

14” x 14” Plasma Static Brackets (PSB)

Table 3: Parts List

REF

DESCRIPTION

QTY

10

Wall Mount

1

20

Cover Plates

2

30

End Caps

4

40

Adjustment Wrench (not shown)

1

50

Tiewraps

12

—

Lag Bolts (required, not supplied)

4

—

Flat Washer (required, not supplied)

4