Installation Instructions
MSP-GBARKTP320
7
Figure 10
ADJUSTMENTS
Display Adjustment
The MSP-GBARKTP320 mount allows horizontal, pitch, and
rotational adjustment of each display.
The MSP-GBARKTP320 mount also allows a full 360 deg. of
display rotation with a maximum pitch range of 15° up and 15°
down.
Display Horizontal Position Adjustment
To adjust display horizontal position:
1.
Loosen Centris bracket rear adjustment knob (See Figure
11).
2.
Slide Centris bracket with display left or right until properly
positioned on array rail.
3.
Tighten Centris bracket rear adjustment knob.
Figure 11
Display Pitch and Roll Adjustment
To adjust display pitch or roll position:
1.
Loosen Centris bracket front adjustment knob. (See Figure
12)
2.
Tilt display up or down, or adjust display roll left or right until
properly positioned.
3.
Tighten Centris bracket front adjustment knob.
Figure 12
CABLE MANAGEMENT
The MSP-GBARKTP320 mount includes cable management
features used to properly route and secure display cables.
To use the cable management features:
1.
Connect cables to display.
2.
Route cables through cable clips on array rail.
3.
Route cables down pole and away from mount and secure
to pole using sheath (N).
Figure 13
End Lock
End Lock Retaining Screw
Centris Head
(A)
Horizontal
Adjustment
Knob
Pitch/Roll
Adjustment
Knob
(N)
cable clips
