background image

Instruction Manual

PAC-Y1

1

 IMPORTANT WARNINGS and CAUTIONS!                                                             

WARNING:

A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.

CAUTION:

A

 CAUTION

 alerts you to the possibility of damage or destruction of equipment if you do not follow the corre-

sponding instructions.

WARNING:  The maximum weight to be installed on the PAC-Y1 is limited to the weight specification of your mount.

CAUTION:

  Inspect the unit for shipping damage.

TOOLS REQUIRED FOR INSTALLATION                                             

• Phillips screwdriver

• 3/8” and 7/16” wrench

• Socket set with extension

• Allen wrench set

NOTE:

  Other tools may be required depending on the

       method of installation.

CONTENTS                                                                                            

INSPECT PARTS BEFORE ASSEMBLY ..... 2

  Inspect The Mount ...................................... 2

ASSEMBLE MOUNT .................................... 4

ATTACH SPEAKER ......................................  6

  Speaker Bracket Attachment....................... 6

  Mount Speaker ............................................ 6

Summary of Contents for PAC-Y1







Reviews: