PAC-Y3
Installation Instructions
4
MOUNT ASSEMBLY
Center Speaker Mounting Bracket Assembly
1.
Assemble left bottom speaker bracket (E) to center speaker
bracket (F) using two 1/4-20 x 1/2" button head cap screws
(L). (See Figure 1)
2.
Assemble right bottom speaker bracket (D) to center
speaker bracket (F) using two 1/4-20 x 1/2" button head cap
screws (L). (See Figure 1)
Figure 1
Upper Speaker Mounting Support Assembly
1.
Assemble left speaker mounting support (B) to left bottom
speaker bracket (E) using two 1/4-20 x 1/2" button head cap
screws (L). (See Figure 2)
2.
Assemble right speaker mounting support (C) to right bottom
speaker bracket (D) using two 1/4-20 x 1/2" button head cap
screws (L). (See Figure 2)
3.
Tighten all hardware.
Figure 2
Speaker Adapter Assembly
1.
Align speaker adapters (G) with mounting holes in speaker
back.
2.
Mount two speaker adapters (G) to speaker assembly using
eight M4x10mm Phillips pan head screws (N) for the YSP-800
speaker (See Figure 3),
OR
four M6x16mm Phillips panhead
screws (P) for the YSP-4000/4100/5100 speakers. (See
Figure 4)
Figure 3
(E)
(D)
(F)
(L) x 4
(C)
(D)
(E)
(B)
(L) x 4
(N) x 8
(G) x 2
(YSP-800 speaker shown)
