Model PDR™
Installation Instructions
4
Inspect The Unit Before Installing
WARNING:
Watch for pinch points. Do not put your
fingers between movable parts.
1.
Carefully inspect the PDR for shipping damage. If any
damage is apparent, call your carrier claims agent
and do not continue with the installation until the
carrier has reviewed the damage.
NOTE:
Read all instructions before starting installation.
2.
Lay out components to ensure you have all the
required parts before proceeding
(see “DIMENSIONAL DRAWING” on page 3).
SPECIFICATIONS
Table 1 provides the specificiations for the mount.
NOTE:
*Dimension does not include the PSB interface
bracket.
INTERFACES
Table 2 lists the interface for the PDR.
TOOLS REQUIRED FOR INSTALLATION
•
Allen wrench set
•
Drill and bit set
•
Wrench set
NOTE:
Other tools may be required depending on the
method of installation.
PARTS LIST
Unpack the carton and verify the contents listed in Table
3. If you are missing any of the listed parts, contact
Customer Service at: 1-800-582-6480.
Table 1:
Mount Specifications
Model
Max Support Weight
Mount
Extended
from Wall
PDR
200 lbs. (90.72kg)
37”
*
Table 2: PDR Interfaces
Model
Interface
PDR
14” x 14” STD Plasma Static Brackets (PSB)
Table 3: Parts List
REF
DESCRIPTION
QTY
10
PDR Wall Mount
1
20
Cover Plates
2
30
End Caps
4
40
Tiewraps
12
—
Lag Bolts, 5/16” x 2 1/2” (required, not
supplied)
4
—
Flat Washers, 5/16” (required, not supplied)
4
—
Wrench, Adjustment
1
—
Bar, Adjustment
1
