Installation Instructions
PLP Series
3
CONTENTS
DIMENSIONAL DRAWING........................................2
TOOLS REQUIRED FOR INSTALLATION...............3
PARTS LIST..................................................................3
PLP INSTALLATION...................................................4
Select Mounting Location ..........................................4
Mount the PLP............................................................5
ATTACH PSB TO THE DISPLAY ..............................6
INSTALL THE DISPLAY ............................................6
REMOVE THE DISPLAY ............................................6
TILT ADJUSTMENT....................................................7
CABLE CONNECTION................................................7
TOOLS REQUIRED FOR
INSTALLATION
•
Drill and drill bit set
•
Socket wrench set
NOTE:
Other tools may be required depending on your
method of installation.
Figure 1. PLP Parts
PARTS LIST
Prior to assembly, unpack the carton completely. Verify
contents listed in Table 1 and Figure 1.
Read installation instructions completely. If you are
missing any of the listed parts, contact Customer Service
at: 1-800/582-6480.
Table 1. Parts List
REF DESCRIPTION
QTY
10
PLP Series Wall Mount
1
—
BOLT, Lag, 5/16” x 2 ½” (required, not
supplied)
4
—
WASHER, 5/16” (required, not supplied)
4
10
4 Lag Bolts
(Not supplied)
4 Washers
(Not supplied)
