Installation Instructions
Model MSP-SPWH (PWH™)
9
CABLE MANAGEMENT
WARNING:
Make sure your cables do not run through
a pinch point.
1.
Route power/audio/video cables through the cable
channel in top arm (see figure 10), allowing sufficient
slack in cables for extension and avoiding pinch
points, and secure cables using two clips and two
tiewraps (40, not shown).
2.
Route power/audio/video cables along bottom arm
(see Figure 11), using tiewraps (40, not shown) to
secure cables to each arm, and through cable
channel.
CAUTION:
To prevent equipment damage, do not
route cables through holes in the display mounting
plate.
3.
Route power/audio/video cables to an open area
behind the mounting plate (not shown). Leave a
sufficient amount of slack in cables to allow for
connection and extension where needed.
Figure 10: Cable Management Channel (Top)
Figure 11: Cable Management Channel (Bottom)
Cables
Tiewraps
Top Cable
Management Channel
Management Channel
Bottom Cable
