Installation Instructions
QMP1MB
7
Stand Use and Maintenance
CAUTION:
This stand is intended for use only with the
products and maximum weight indicated (150 lbs [68.04 kg]).
Use with other products or products heavier than the
maximum weight indicated may result in instability causing
possible injury.
WARNING:
STAND CAN TIP OVER RESULTING IN RISK
OF INJURY. Move stand slowly. Apply moving force on
narrow dimension. Never apply force at top - always push
near middle. Push, don’t pull.
Figure 9
1.
Always place stand on level surface.
2.
Always lock the wheels when the stand is not moving.
3.
Check and tighten the hex nuts on the casters occasionally.
(See Figure 10) These should be checked especially after
use on uneven ground.
Figure 10
Push stand
near middle
Do NOT push
stand near top
x 4
