Installation Instructions
RSME
7
Rough Alignment of RSME
1.
Turn RSME clockwise or counter-clockwise until
front of mount is facing target.
2.
Secure RSME to pipe by turning set screw until
tight.
CAUTION:
DO NOT OVERTIGHTEN!
Overtightening of setscrew can damage threads on
pipe.
3.
Turn security screw using a Phillips screwdriver
until set screw cannot be seen through access hole
in RSME.
1b
(A)
3
2
4
(A)
2
1
3
1
(bottom view)
RSME INSTALLATION
Threaded Pipe Installation
NOTE:
CPA adapter must be removed prior to
installing RSME to threaded pipe. See Section
1a for details.
1.
Carefully determine required mounting location.
IMPORTANT ! :
This will require knowing the
lens to screen distance. See projector
specifications for details on determining this
distance.
2.
Remove CPA adapter from RSME by loosening set
screw.
3.
Install 1-1/2" NPT or NPSM steel or aluminum
threaded extension column (not included) into
threaded collar until tight, with a minimum of four
threads engaged.
WARNING:
IMPROPER INSTALLATION CAN
RESULT IN SERIOUS PERSONAL INJURY OR
DAMAGE TO EQUIPMENT! Structural members
MUST
be capable of supporting five times the
combined weight of all equipment being mounted.
4.
Align RSME with end of NPT pipe.
5.
Thread RSME up onto pipe by turning until hand
tight.
(not included)
(not included)
