Chapter 4
Configuring Settings
（
MODE SELECT Mode
）
CMN034-002
原本
(Original instructions)
45
E
nglis
h
4.2.2
Time Setting Mode for Shaking
The shaking time can be adjusted as desired. (Settable range: 20 to 180 seconds. Initial setting value:
20 seconds)
1.
Move to the MODE SELECT mode.
2.
Press the Up/Down arrow buttons to move to the shaking setting mode (“Shaking Set”).
3.
Press the ENTER button.
4.
Press the Up/Down arrow buttons to move to the shaking time setting mode
（
“Shake Time ***sec”
）
.
5.
Press the ENTER button.
6.
Press ← or → to change digit, and ↑ or ↓ to change value.
7.
Press the ENTER button to determine the value.
8.
To exit this mode, press the MODE SELECT button to return to normal mode.
4.2.3
Interval time Setting Mode for Auto-shaking
The cumulative time until auto-shaking is activated can be adjusted as desired. (Settable range: 0 to 60
minutes. Initial setting value: 60 minutes)
1.
Move to the MODE SELECT mode.
2.
Press the Up/Down arrow buttons to move to the shaking setting mode (“Shaking Set”).
3.
Press the ENTER button.
4.
Press ↑ or ↓ to move to the interval time setting mode for auto-shaking.(“Interval***min”)
5.
Press the ENTER button.
6.
Press ← or → to change digit, and ↑ or ↓ to change value.
7.
Press the ENTER button to determine the value.
8.
To exit this mode, press the MODE SELECT button to return to normal mode.
Summary of Contents for CBA-750AT3-HC-DSA-V1
