ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Seat Support...
To assemble Swing Frame...
22mm screws
C
A
A
D
B
B
1
2
1
Connect the lower boom tube with the support
frame.
Secure the tube and the frame by inserting 4 x
(#2) screws.
Insert 2 x (#1) screws to lock the lower arm tubes
with the seat support, as shown in image.
Connect plastic seat with support frame, as shown in
image.
Ensure the corresponding letters that are displayed on
the sides of the frame match up and ensure the pop
pins ‘click’ allowing the pop-ins to engage securely.
Insert left leg tube onto left support tube, ensuring that
the label ‘A’ on each tube aligns as per diagram.
Repeat previous step for the right leg tube, ensuring
that the label ‘B’ on each tube aligns as per diagram.
1a.
1b.
1c.
2a.
2b.
1a.
1b.
3
Align the canopy up with the back of the seat, as
shown in image.
Connect the zip and slide it to the end.
3a.
3b.
