background image

             

SAFETY PRECAUTIONS

Check that all safety locks are engaged before placing a child in the high chair.
Always keep child in view while in high chair.
Not recommended for a child under 6 months old.
The tray is not designed to hold the child in the high chair.
Use safety locks and brakes at all times.
Always secure your child in the restraint. Ensure that your child wears a correctly fitted and adjusted harness at 

all times.
The high chair should only be used in an upright position once the child is capable of reliably and consistently 

sitting upright.
Only use the high chair on a secure level surface.

DO NOT

 allow children to stand on the seat or footrest or climb into or out of the high chair.

When adjusting the high chair, make sure that parts of your child’s body are clear of any moving parts.

DO NOT 

carry the high chair with a child in it.

To reduce the risk of injury, position the high chair away from furniture, walls, hot surfaces and liquids, window 

covering cords, and electrical cords. Position the high chair away from furniture when the high chair is not being 

used at a table with the tray removed.
Periodically check that all parts of the high chair are in good working order.

DO NOT

 use the high chair if it is damaged or broken.

The weight of the child using this high chair should not exceed 17kgs.
Promptly replace worn out or broken parts.
Apply wheel lock/brakes when not moving the high chair.
Use the high chair on a flat, even and horizontal floor. Do not elevate the high chair on any structure or table.

DO NOT

 use the high chair unless all components are correctly fitted and adjusted.

Read all instructions before assembly and use of the swing high chair. 

Keep instructions for future use.

FOLLOW THE MANUFACTURER’S INSTRUCTIONS.

DO NOT LEAVE CHILDREN UNATTENDED.

THE HARNESS MUST ALWAYS BE USED AND CORRECTLY FITTED - MOST INJURIES FROM HIGH 

CHAIRS ARE CAUSED BY FALLS.

POSITION THE HIGH CHAIR AWAY FROM SOLID STRUCTURES AND BENCHES TO AVOID INJURIES 

CAUSED BY FALLS AND BY ACCESS TO DANGEROUS ITEMS.

DO NOT USE THE HIGH CHAIR UNTIL THE CHILD CAN SIT UP UNAIDED.

BE AWARE OF THE RISK OF OPEN FIRE AND OTHER SOURCES OF STRONG HEAT, SUCH AS ELECTRIC 

BAR FIRES, GAS FIRES ETC. IN THE VICINITY OF THE HIGH CHAIR.

WARNING

Summary of Contents for 044286-376

















Reviews: