background image

             

SAFETY PRECAUTIONS

Only use the swing on a secure level surface.
Discontinue use of swing when infant attempts to climb out.
Discontinue use of swing when infant can roll over. 
Never use the toy-bar to carry the swing. 
Age range suitability: 0 - 6mths / 9kgs.
This cradle swing does not replace a cot or a bed. Should your child need to sleep, then it should be placed in a 

suitable cot or bed. 
Do not use accessories or replacement parts other than those approved by the manufacturer.

FOLLOW THE MANUFACTURER’S INSTRUCTIONS.

DO NOT LEAVE CHILDREN UNATTENDED.

IT IS DANGEROUS TO USE THE RECLINED SWING ON AN ELEVATED SURFACE (E.G A TABLE).

THIS PRODUCT IS NOT INTENDED FOR PROLONGED PERIODS OF SLEEPING. 

ALWAYS USE THE RESTRAINT SYSTEM. 

DO NOT USE THIS PRODUCT ONCE YOUR CHILD CAN SIT UP UNAIDED OR WEIGHS MORE THAN 9KG.

TO AVOID INJURY ENSURE THAT CHILDREN ARE KEPT AWAY WHEN UNFOLDING AND FOLDING THIS 

PRODUCT.

DO NOT LET CHILDREN PLAY WITH THIS PRODUCT. 

DO NOT MOVE OR LIFT THIS PRODUCT WITH THE BABY INSIDE IT. 

NEVER USE THIS PRODUCT ON AN ELEVATED SURFACE (EG. A TABLE).

DO NOT USE THE PRODUCT IF ANY COMPONENTS ARE BROKEN OR MISSING.

DO NOT MIX OLD AND NEW BATTERIES.

DO NOT MIX ALKALINE, STANDARD (CARBON-ZINC) OR RECHARGEABLE (NICKLE-CADMIUM) 

BATTERIES.

ADULT SUPERVISION IS REQUIRED WHEN CHARGING RECHARGEABLE BATTERIES. 

RECHARGEABLE BATTERIES ARE TO BE REMOVED FROM THE PRODUCT BEFORE BEING CHARGED.

ALWAYS REMOVE FLAT OR EXHAUSTED BATTERIES FROM THE PRODUCT. 

DO NOT SHORT CIRCUIT THE SUPPLY TERMINALS.

NON-RECHARGEABLE BATTERIES ARE NOT TO BE RECHARGED.

THE USB CORD IS NOT A TOY.

WARNING

WARNING

Summary of Contents for 044286-376

















Reviews: