7
To assemble Castors...
1
Whilst the chair is still on the floor, locate one
Castor wheel.
Insert the Castor into one of the castor holes on
the bottom of a lower leg assembly.
Push in until tight.
Repeat steps 1b - 1c for the remaining 3 castor
wheels.
Stand chair upright.
1a.
1b.
1c.
1d.
1e.
ASSEMBLY / OPERATING INSTRUCTIONS
To fit Serving Tray...
1
Locate one Tray Mounting Arm. (Note these are
marked ‘L’ and ‘R’ to correspond with the ‘L’ and ‘R’
marked on the outside of the Seat).
Insert the rear tabs on the Tray Mounting Arm into the
slot in the Seat moulding.
Push down on the front of the Tray Mounting Arm to
secure.
Position the tray at the front of the arms,pull the tray
lever found on the underside of the tray
(
b), whilst
sliding the tray along with the slot (c)to the position
required.
The tray has three positions as indicated on the arm
rests,release the lever to lock in position.
In the case the tray is not automatically locked onto
the armrests, move the tray slightly until a double click
is heard signalling the tray is securely locked.
This tray also features a removable sub-tray.
Lift the tabs on the side of the sub-tray and lift to remove.
1a.
1b.
1c.
1d.
1e.
1f.
1g.
1h.
Never leave the tray fitted in a position in which the warning signs are visible.
WARNING
NOTE!
Castor wheels can be locked by pushing down the
locking tab on each wheel. Release these tabs to release brakes.
b
c
